Home » Automatic Transfer Switch » ATS Controller » ATS-380

ATS-380

Automatic Transfer Switch Controller 380V System

ATS-380 is the programmable micro-processor based design automatic transfer Switch (ATS) Controller with built in transformers for use on 380VAC system only. There is no need for PC connection or software driver, all operation and program can be accessed directly on ATS-380 front panel.

Brochure | Manual | Controller Assembly

*When the system voltage is different from 380 VAC, please use ATS-01 programmable ATS control module.

Features

  • Micro-Processor Based Design
  • Compact Size with User-Friendly LED Display
  • Simple Push Button Programming & Operation (There is no need for PC connection or software -- all operations can be done directly on ATS-380 front panel)
  • Provide 3 or 1 Phase Volt. / Freq. Monitoring & Protection For Both Normal & Emergency Sources
  • Transfer Fail Alarm, Pre-exerciser or Pre-transfer Signal Output
  • Remote Engine Start Signal
  • Built-in Weekly Exerciser Timer
  • No Generator Battery Connection Needed (Program settings are auto-saved into memory and will remain saved even when power is disconnected)

Specifications

Model NO. ATS-380
Input Control Voltage 280~480 VAC 50/60 Hz
Voltage Measurement Range 280~480 VAC 50/60 Hz
Frequency Measurement Range 45~70 Hz
Generator Start Relay 7A @ 250 VAC Max.
Transfer to Normal Relay 7A @ 250 VAC Max.
Transfer to Standby Relay 7A @ 250 VAC Max.
Alarm output Auxiliary Relay 0.5A @ 120 VAC   /   1.0A @ 24 VDC
Environment Operating Temperature : -20~70 °C
Storage Temperature : -35~85 °C
Operating Humidity : Maximum 90%
All Phase Voltage & Frequency Monitoring Over Voltage Adjustable Range : 390~480 VAC
Under Voltage Adjustable Range : 280~370 VAC
Over Frequency Adjustable Range : 51~70 Hz
Under Frequency Adjustable Range : 45~59 Hz
Adjustable Timers TDNE : 0~300 sec.
TDES : 0~30 sec.
TDEN : 0~300 sec.
TDEC : 0~300 sec.
Pre-transfer Signal : 1~99 sec.
Pre-exerciser Signal : 1~99 sec.
Engine Exerciser Test Period : 1~60 min.
4 Digit 7 Segment LED Display
  • Programmable Display with 3 Phase Voltage & Frequency
  • Internal Program Settings & Status Display
  • TDEN, TDNE & TDEC Real-Time Countdown Display
User-Friendly Status LED Display
  • Display AUTO/TEST Status
  • Over / Under Volts & Freq. (Both Normal & Emergency)
  • Display Real Time Power Loop
Panel Installation Cut-Out 113.0 x 168.0 ±0.5 mm
Dimensions 180.0 (L) x 133.0 (W) x 58.0 (H) mm
Weight 1100g ±2%

*Note : All features & specifications subject to change without notice.

Dimensions( UNIT : mm )

Dimensions

Related Products :

Automatic Transfer Switches ControllersATS-01 Automatic Transfer Switches Controllers for ProtectionCM0900